Thule Ski Rack Flush Mount Adapter Kit
Thule Ski Rack Flush Mount Adapter KitThule Ski Rack Flush Mount Adapter KitThule Ski Rack Flush Mount Adapter KitThule Ski Rack Flush Mount Adapter KitThule Ski Rack Flush Mount Adapter KitThule Ski Rack Flush Mount Adapter Kit

Thule Ski Rack Flush Mount Adapter Kit

Item Number: thule-ski-rack-flush-mount-adapter-kit
The Thule Ski Rack Flush Mount Adapter Kit is a conversion kit that allows Thule ski-snowboard carriers to mount flush to roof rack cross bars with T-slot channels (also called top-slots, t-tracks etc.) running the length of the cross bar, such as Thule AeroBlade load bars and Rapid Aero (discontinued by Thule), Whispbar Racks cross bars, Votex brand OEM roof racks, Thule Xsporter / Xsporter Pro truck racks etc. The result is a much more premium, low-profile appearance. Ideal for 92726, 92725, 92724, 91725 models and more.
  • Made in the USA
Quantity:
This item is currently out of stock!
Description
INSTRUCTIONS
VIDEOS and photos
faqs
The Thule Ski Rack Flush Mount Adapter Kit is a conversion kit that allows Thule ski-snowboard carriers to mount flush to roof rack cross bars with T-slot channels (also called top-slots, t-tracks etc.) running the length of the top of each cross bar, such as Thule AeroBlade load bars and Rapid Aero (discontinued by Thule), Whispbar Racks crossbars, Votex brand OEM roof racks (Votex racks have silver elliptical bars with a T-slot channel in them and are found on certain model Audi, BMW, Saab, VW, Volvo vehicles etc.), Thule Xsporter Pro truck rack (and older model Xsporter pickup truck bed racks) etc.

All hardware included for completing the conversion, and replaces the mounting hardware on the carrier. A much more premium, low-profile look is achieved with the snowboard-ski rack mounted flush to the crossbars. The carrier sits lower and it eliminates the unsightly appearance of the regular mounting hardware wrapped around the outside of the cross bars.

PLEASE NOTE:
The conversion procedure differs by ski rack model.

And as always, please feel free to contact us with any additional questions you may have and/or help and guidance with installation etc. The team of ORS Racks Direct experts are here to assist you.
PLEASE NOTE:
The conversion procedure differs by ski rack model.

And as always, please feel free to contact us with any additional questions you may have and/or help and guidance with installation etc. The team of ORS Racks Direct experts are here to assist you.


Thule 92725 / 92724 Universal Flat Top
Remove each Speedlink mount clamp using a wrench and replace with T-slot sliding bolt and wing-knob provided in the Thule Ski Rack Flush Mount Adapter Kit. That's it, you are now ready to load up and hit the slopes!


Thule 91725 Universal Flat Top (also 91724)
Drill out the rivets that attach the stock mounting clamps to the underside of the carrier...
how to install the thule ski racks flush mount kit and thule 91725 ski-snowboard carrier
...Remove the stock mounting clamps, and reuse the old holes to install the T-slot sliding bolts. Tighten the wing-knobs onto the T-slot sliding bolts to secure the carrier. You are now finished and ready to load skis and snowboards!


Thule 92726 Universal Pull Top
This conversion requires drilling a new hole through the bottom of the carrier. With the slide-out feature fully extended, twist off the more accessible, innermost Speedlink clamp, using a wrench to secure the Nylock nut that anchors the clamp. To remove the less accessible outermost Speedlink, reach under the black rubber gasket with a wrench or needle-nose pliers to secure the second Nylock nut, using your other hand to twist off the second Speedlink...
how to install the thule ski-snowboard racks flush mount kit and thule 92726 snowboard-ski carrier
...Drill a new, more accessible hole about an inch in from the end of the rubber gasket...
how to install the thule ski-snowboard carriers flush mount kit and thule 92726 snowboard-ski rack
...NOTE: When installing the T-slot sliding bolts, DO NOT use the plastic wing knobs included in the Flush Mount Kit – reuse the stock Nylock nuts to avoid interference with the sliding mechanism.


Thule 91726 Universal Pull Top
More difficult than other conversions, this process is the same as 92726 but the mounting clamps are attached by rivets instead of Nyloc nuts, as with 91725 and 91724. The rivet securing the less accessible outermost mount can only be drilled out from the bottom...
how to install the thule racks flush mount kit and thule 91726 snowboard-ski carrier
...due to interference from the sliding mechanism. Drill a new hole to install the outermost T-slot sliding bolt...
how to install the thule flush mount kit and thule 91726 universal pull top snowboard-ski rack
...DO NOT use the plastic wing knobs included in the Flush Mount Kit – replace them with 6 mm Nylock nuts to avoid interference with the sliding mechanism.

And as always, please feel free to contact us with any additional questions you may have and/or help and guidance with installation etc. The team of ORS Racks Direct experts are here to assist you.

Coming Soon!

Product Reviews

Thule Ski Rack Flush Mount Adapter Kit
$19.95
4 Stars based on 10 Review(s)
ron
RI
5 Stars
I would recommend this item to a friend.

simple and perfect
March 26, 2016
Got to use my 15 year old ski rack for thule square bars on my new rhino aero bars foe 15 bucks. Couldn't ask for more.
Pros:
It works
Cons:
None

Tyler
Phoenix, Arizona
4 Stars
I would recommend this item to a friend.

Too wide but should work fine
February 18, 2016
Bought it with the hopes it would fit on my GMC Canyon GearOn Crossrails but the T-bolts are a little too wide but afree some grinding it should fit fine
Pros:
Sleek and more secured fit
Cons:
Too Wide for my application but none other than that

Jesse
Fremont
5 Stars
I would recommend this item to a friend.

Perfect fit and great look
January 21, 2016
Made the snowboard rack fit a lot more flush to my carrier bars. They worked with me on some faster shipping. Overall great!

Tara
Portsmouth, NH
5 Stars
I would recommend this item to a friend.

Exactly what I was looking for!
January 19, 2016
Great product, worked perfectly and my roof rack snowboard attachments look much better sitting flush on my Thule roof rack bars.

Scott
Fresno, CA
3 Stars

Great concept but poor clearance
December 29, 2015
Install is easy. Bolt them up, slide them in, and then tighten. The problem with this flush mount is that it does not give much clearance for snowboard bindings. I have a set of Thule 724 mounted on Aeroblades and with this system, I cannot fit 4 snowboards.
Pros:
Easy install and sleek look.
Cons:
Clearance issues.

Dan
MA
5 Stars
I would recommend this item to a friend.

Ski Rack Adapter
December 13, 2015
Quick delivery. Great price and quality as expected.

LD
Idaho
1 Stars

Does not fit Whispbar
December 12, 2015
Yakima Whispbars are bow-shaped and have a rubber gasket in them. This kit doesn't fit the Whispbar because of both of these reasons.

Mark L.
Doylestown, PA
5 Stars
I would recommend this item to a friend.

Fits Perfectly
November 29, 2015
Works and fits as described. Great alternative to buying new feet. Buying a second set for another Thule ski rack.

Derek
Reading, PA
4 Stars
I would recommend this item to a friend.

Simple product makes huge improvement
October 30, 2015
Hard to believe that something this simple did not exist up until now to remove the unsightly clamps on my ski rack. Simple, inexpensive, easy to install and it improves the look tremendously. I needed longer T bolts for my custom application and they were very helpful and got me the proper size T bolts for my unique needs. Thank you,

kirk
des moines IA
5 Stars
I would recommend this item to a friend.

Slim line
October 28, 2015
cool system the flush look and solid attachment of this kit was just what I was looking for
Pros:
very sturdy looks great with flush mount EASY to drill out and attach
Cons:
unless you own a drill and a somewhat handy person it may be on the harder side to attach



Back to Top