YAKIMA RACKS 10% OFF SALE GOING ON NOW!
+ free shipping on orders of $99 & over (contiguous US only)
*Yakima cargo roof boxes excluded from free shipping program
The complete Yakima Control Towers roof rack system creates a strong and sturdy multi-purpose roof rack system for cars and trucks with a factory rack and track system. The included Yakima Landing Pads snap into the factory rack tracks, replacing the weak and/or incompatible factory rack setup. The Yakima Control Towers then simply attach to the Landing Pads. This system also works with all Yakima permanently installed Tracks and vehicles with pre-installed fixed attachment points provided by the vehicle manufacturer. Also permanently mounts to Yakima #7 Landing Pads (for metal surfaces) & Yakima #6 Landing Pads (for fiberglass surfaces) for fiberglass truck cap, camper shell or tonneau cover etc & sheet metal roofs that have no factory rack already. Set of four Landing Pad Covers also included for providing a finished look when Yakima Control Towers roof rack system is removed and only Landing Pads are left on rooftop (Covers simply snap onto Landing Pads). We highly recommend a four pack of Yakima Locks (not included; see accessory add-ons below) to lock the rack to vehicle.
The Yakima Control Towers complete roof rack includes all 3 components that are necessary for installing a general-purpose base rack, providing the platform that will allow you to then connect roof mount gear carriers that carry your gear and equipment:
- Four (4) Yakima 0214 Contol Towers.
- Four (4) Yakima Landing Pads (specific to your vehicle; see ordering notes below).
- Two (2) Yakima Cross Bars (bar end caps included).
*please note: if selecting 86" length cross bars you will receive end caps specific to the 86" bars (an additional cost that is included in the additional cost of the 86" bars) - Also includes four (4) Yakima Landing Pad Covers.
Can be locked to the vehicle using a four pack of Yakima Racks SKS Lock Cores (not included; see accessory add-ons below). New lower profile for a sleek integrated look. Hassle-free adjustment of the crossbar spread on tracks without having to remove towers or bars - simply slide them to whatever position desired. Easy-to-follow installation instructions manual included. Yakima Racks Lifetime Warranty!
» Yakima Control Towers Roof Rack Install Instructions
» Yakima roof rack systems comparison chart
Yakima Control Tower System Resource Wall
Product Reviews
Read the reviews below to find out what other customers are saying about the Yakima Control Towers roof rack system.
Contribute Your Review of the Yakima Control Tower Car Rack |
» all Yakima Control Tower roofrack reviews
Excellent Product and Service
this Yakima Control Towers roof rack review by Matt
vehicle year/make/model: 2010 Jayco 1207 tent trailer
item(s) transported: bikes
I was looking for a roof rack for my pop up camper that fit directly into the factory rails and ORS did just that. Thank you so much.
All - In - One - Rack System
this Yakima Control Towers roof rack review by Hal J.
vehicle year/make/model: 2004 Nissan Titan
item(s) transported: kayaks, skis, mtn. bikes
I mounted this set-up on the sliding tracks on my fiberglass topper, and it works great for all my equipment. Adjustment is quick and easy, and I can trust that my gear will stay put!
Perfect Rack for Honda Element
this Yakima Control Towers roof rack review by Lonny Matsuda
vehicle year/make/model: 2003 Honda Element
item(s) transported: cargo gear box
We installed the Control Towers in 20 minutes and the bars and locks in another 10 minutes. Everything worked great and our current Thule Roof Box fit on the Yakima racks without any drilling, perfect hole matchup. Thank you ORS!
Much cleaner and easier to use than Q-Towers
this Yakima Control Tower review by W.L. Buckler
vehicle year/make/model: 2001 Ford Explorer
item(s) transported: Gear of all sorts
Control towers are the way to go if you have the option of either those or the Q-Towers. Not that there's anything wrong with the Q-Towers, its just that the Control Towers look a lot cleaner and are way easier to install than the Qs. I had Q-Towers on my last vehicle and was able to reuse my bars and I can say that I like the Control Towers much, much more.
Set 'em and forget 'em
this Yakima Control Tower review by K.J.T.
vehicle year/make/model: 2005 Dodge Grand Caravan
item(s) transported: bikes
Yakima Control Towers are great. So much easier to deal with than the Q-Towers. You can just "set 'em, and forget 'em. They don’t need to be constantly readjusted and the Landing Pads mounted in the Dodge Factory Tracks perfectly. They go on so easily and can be removed from the car easily. In the winter, I just take the whole system off with my three bike attachments still attached. Couldn't be more convenient.
Better than factory rack. Easy on/off.
this Yakima Control Towers review by Vlad
vehicle year/make/model: 2009 Mazda 3
item(s) transported: kayaks, bikes
Mazda (US version) takes landing pads LP11. Mounting (with the included easy drill of the black strips) is about 30 minutes. Once complete landing pads and towers are easy on/off. Much better than factory racks since you can take them off and save gas and eliminate wind noise. Even the landing pads are easy on/off, but in reality they're so inconspicuous that you MAYBE bother to take them off once a season. Great value, easy install.
Product Discussion
Discuss the Yakima Control Tower roofrack system. Use the form below to fire away with your questions, answers and general comments about this product. |
» all Yakima Control Towers discussion posts
Michael asks - I'm confused about the 86 inch cross bars option. Is this what I need for a popup camper? Do end caps come with them just like all the other cross bars choices come with end caps?
ORS Crew answers - Yes the 86" bars are specifically made for applications such as pop up campers etc. They are thicker than the normal Yakima 48", 58", 66" and 78" round crossbars, so they need different end caps. You will receive end caps specific to the 86" bars and the additional cost is included in the additional cost of the 86" bars when selecting this size in the crossbars option drop down box when ordering this package. If selecting any shorter cross bars size, you will receive end caps to fit them at no additional cost.
Brad K. asks - I'm looking at the Yakima Control Towers, Landing Pads and cross bars for a 2005 Honda CRV with fixed mount points. Will this work? What is the racks weight limit?
ORS Crew answers - Yes, the Yakima Control Towers roof rack (includes four Control Towers, four LP8 Landing Pads and pair of 48” cross bars) is a superb match and fits the 2005 Honda CRV fixed mounting points. This has a max weight limit of 125 lbs. Again, the #8 Landing Pads LP8 are the model needed for the 05 Honda CR-V fixed points.
Musky asks - I have a Fleetwood tent trailer with factory roof tracks. Which landing pads do I need to order?
CRITTER3 responds - Use the Yakima LP1 Landing Pads for the Fleetwood Tent Trailer tracks on the roof. My Fleetwood Tent Trailer roof rack is the Yakama Control Tower system too. I love it!
J.J.M. asks - I have Yakima Control Towers and bars on the cap of my Dodge truck using the LP1 Landing Pads on Yakima Roof Tracks. I want to buy a set of Landing Pads for a 2010 Honda CR-V so I can then switch the Control Tower rack between the topper and CR-V. What Landing Pads do I need for the CRV?
ORS Crew answers - You will need the LP10 Landing Pads, which attach to the 2010 Honda CRV fixed rack attachment points on the rooftop.
gkallio asks - Will this work as a 2010 Honda Element roof rack? I have many Yakima accessories that I would like to attach to the cross bars if it does work.
ORS Crew answers - Yes we highly recommend the Yakima Control Towers system as a '10 Honda Element roof rack. Using the included LP9 Landing Pads it easily mounts to the pre-placed points (fixed-points) located on the Honda Element rooftop. Also includes a pair of 58 inch cross bars (you can choose any length cross bars, but be sure they are at least the 58" length as any shorter and they won't be long enough to span across the Honda Element rooftop.) Easy instructions included for installation.
Henry Lauchland asks - Does the Yakima Control Towers with the LP1 Landing Pad work on the Thule track system that comes on the Leer camper shell?
ORS Crew answers - Yes the Yakima Landing Pad 1 is fully compatible with all Thule roof tracks.
John H. asks - Any known issues with using the Thule 897XT Hullavator kayak rack with the Yakima Control Tower / Landing Pad 12 setup on a 2010-12 Subaru Outback wagon?
ORS Crew answers - This is a Thule Racks confirmed and sanctioned fit, the 897XT is a great choice for use as a new model Subaru Outback kayak rack and attaches nicely to the Yakima Control Towers / Landing Pad 12 / round crossbars system.
Product Videos
Yakima Control Towers roof rack review video & demo by ORS Racks Direct. Demonstration movie of the Yakima Racks Control Tower system, in this case used as a complete multi-purpose base rack for a vehicle with factory fixed point rack attachment locations on the car rooftop. The Yakima Landing Pads 11 ( LP11 ) connect to the Mazda 3 fixed attachment points, and the Control Towers snap onto the Landing Pads. A pair of Yakima crossbars is also included. With this multi-purpose car rack installed, you can then connect any gear carriers to the base rack cross bars. There are several Yakima Landing Pads available for use with specific vehicle fixed attachment points. This is just one example of the Yakima Control Towers and Landing Pads versatility. Specific Landing Pads can also be used in combination with Control Towers for mounting to factory tracks (replacing the factory rack), permanently installed roof tracks and other permanent installation configurations.
Yakima Racks Official Control Towers Video
|
Customer Installation Pictures
Proud current customer with ORS Racks Direct? |
» all Yakima Control Towers Customer Install Pics
Accessories
All Yakima Locks for Car Racks - Including Bike Ski Snowboard Kayak Canoe Locks etc. | Yakima #6 / #7 Landing Pads for Metal Roofs & Fiberglass Camper Shells, Truck Caps, Tonneau Covers etc. | |
Yakima Roof Track Systems - 2011 Yakima 60" Tracks (one pair) for Fiberglass Pop Up Campers, Truck Toppers, Camper Shells, Tonneaus, Jeep Hard Top etc. - 8001135 | Yakima Tracks - 2011 Yakima 54" Roof Tracks (one pair) for Sheet Metal Surfaces Such As Van, Pickup Truck, Car Metal Rooftops etc. - 8001127 | |
Yakima Tracks - 2011 Yakima 42" Roof Tracks (one pair) for Sheet Metal Surfaces Such As Van, Car, Pickup Truck Metal Rooftops etc. - 8001126 | All Yakima Fairings - Roof Fairings for Yakima Car Racks | |
2011 Yakima WindJammer - Eliminate Roof Rack Noise with the Wind Jammer - 8001115 | Thule Roof Rack Accessories - 2012 Thule 232 Step Up Wheel Step | |
Yakima Spare Parts & Replacement Parts for All Yakima Racks |
ORDERING NOTES
To ensure you receive the correct roof rack system as well as proper crossbars length and Yakima Landing Pads made specifically for your vehicle, in our "order check out" area we will get all your vehicle make/model/year info.
Yakima Racks recommended cross bar length will be provided unless otherwise specified when adding system to your cart.
CLICK HERE to view the cross bar size chart.
Four pack of Yakima Racks Same Key System SKS lock cores (not included; see accessory add-ons above) is recommended for locking rack to vehicle.
QUICK ORDERING SOLUTION
Alternatively, we suggest using our easy Yakima Racks automated fit guide to quickly determine & order the correct multi-purpose base roof rack system and/or gear carrier attachments for your specific vehicle year/make/model:![]()
*please note: Yakima Racks fit guide does not always show all compatible options. Please contact us with any additional compatibility questions.























